What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Battery | battery | % · 0…100 | read only |
| Device temperature | device_temperature | °C | read only |
| Vibration | vibration | — | read only |
| Strength | strength | — | read only |
| Sensitivity | sensitivity | 1…21 | settable |
| Angle x | angle_x | ° · -90…90 | read only |
| Angle y | angle_y | ° · -90…90 | read only |
| Angle z | angle_z | ° · -90…90 | read only |
| X axis | x_axis | — | read only |
| Y axis | y_axis | — | read only |
| Z axis | z_axis | — | read only |
| Voltage | voltage | mV | read only |
| Power outage count | power_outage_count | — | read only |
| Action (button press) | action | vibration, tilt, drop | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"battery": 87,
"device_temperature": 31,
"vibration": false,
"strength": 0,
"sensitivity": 11,
"angle_x": 0,
"angle_y": 0,
"angle_z": 0,
"x_axis": 0,
"y_axis": 0,
"z_axis": 0,
"voltage": 2950,
"power_outage_count": 0,
"linkquality": 120
}
The device only reports data and takes no commands.
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Button"
mode: single
triggers:
- trigger: mqtt
topic: zigbee2mqtt/my_device
value_template: "{{ value_json.action }}"
payload: "vibration"
actions:
- action: light.toggle
target:
entity_id: light.living_room
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.