What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| On / off (1) | state_1 | — | settable |
| On / off (2) | state_2 | — | settable |
| Switch (usb) | state_usb | — | settable |
| Power outage count | power_outage_count | — | read only |
| After power loss | power_on_behavior | on, previous, off, inverted | settable |
| Power (1) | power_1 | W | read only |
| Power (2) | power_2 | W | read only |
| Power socket 2 (usb) | power_usb | W | read only |
| Energy | energy | kWh | read only |
| Current | current | A | read only |
| Multi click (1) | multi_click_1 | — | settable |
| Multi click (2) | multi_click_2 | — | settable |
| Child lock (1) | child_lock_1 | — | settable |
| Child lock (2) | child_lock_2 | — | settable |
| Overload protection | overload_protection | W · 100…3250 | settable |
| Led indicator | led_indicator | — | settable |
| Flip indicator light | flip_indicator_light | — | settable |
| Identify | identify | identify | settable |
| Action (button press) | action | hold_1, hold_2, single_1, single_2, double_1, double_2, release_1, release_2 | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"state_1": "ON",
"state_2": "ON",
"state_usb": "ON",
"power_outage_count": 0,
"power_on_behavior": "on",
"power_1": 12.4,
"power_2": 12.4,
"power_usb": 0,
"energy": 3.21,
"current": 0.06,
"multi_click_1": false,
"multi_click_2": false,
"child_lock_1": false,
"child_lock_2": false,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_1":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_2":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_usb":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"power_on_behavior":"previous"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"multi_click_1":true}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Turn off when idle"
mode: single
triggers:
- trigger: numeric_state
entity_id: sensor.my_device_power
below: 2
for: "00:15:00"
actions:
- action: switch.turn_off
target:
entity_id: switch.my_device_1
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.