What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Low battery | battery_low | — | read only |
| Voltage | voltage | mV | read only |
| LED config (top left short press) | config_led_top_left_press | — | settable |
| LED config (top right short press) | config_led_top_right_press | — | settable |
| LED config (bottom left short press) | config_led_bottom_left_press | — | settable |
| LED config (bottom right short press) | config_led_bottom_right_press | — | settable |
| LED config (top left long press) | config_led_top_left_longpress | — | settable |
| LED config (top right long press) | config_led_top_right_longpress | — | settable |
| LED config (bottom left long press) | config_led_bottom_left_longpress | — | settable |
| LED config (bottom right long press) | config_led_bottom_right_longpress | — | settable |
| Action (button press) | action | button_top_left_release, button_top_right_release, button_bottom_left_release, button_bottom_right_release, button_top_left_longpress, button_top_right_longpress, button_bottom_left_longpress, button_bottom_right_longpress … | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"battery_low": false,
"voltage": 2950,
"linkquality": 120
}
The device only reports data and takes no commands.
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Button"
mode: single
triggers:
- trigger: mqtt
topic: zigbee2mqtt/my_device
value_template: "{{ value_json.action }}"
payload: "button_top_left_release"
actions:
- action: light.toggle
target:
entity_id: light.living_room
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.