What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| On / off | state_l1 | — | settable |
| On / off | state_l2 | — | settable |
| Record rf | record_rf | record_l1, record_l2 | settable |
| Clear rf | clear_rf | clear_l1, clear_l2 | settable |
| Rf status | rf_status | ok, error | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"state_l1": false,
"state_l2": false,
"record_rf": "record_l1",
"clear_rf": "clear_l1",
"rf_status": "ok",
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l1":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l2":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"record_rf":"record_l2"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"clear_rf":"clear_l2"}'
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.