What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Switch (bottom_left) | state_bottom_left | — | settable |
| Switch (bottom_right) | state_bottom_right | — | settable |
| Switch (top_left) | state_top_left | — | settable |
| Switch (top_right) | state_top_right | — | settable |
| Power-on behavior (bottom_left) | power_on_behavior_bottom_left | off, on, toggle, previous | settable |
| Power-on behavior (bottom_right) | power_on_behavior_bottom_right | off, on, toggle, previous | settable |
| Power-on behavior (top_left) | power_on_behavior_top_left | off, on, toggle, previous | settable |
| Power-on behavior (top_right) | power_on_behavior_top_right | off, on, toggle, previous | settable |
| Action (button press) | action | release_bottom_left, hold_bottom_left, release_bottom_right, hold_bottom_right, release_top_left, hold_top_left, release_top_right, hold_top_right | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"state_bottom_left": "ON",
"state_bottom_right": "ON",
"state_top_left": "ON",
"state_top_right": "ON",
"power_on_behavior_bottom_left": "off",
"power_on_behavior_bottom_right": "off",
"power_on_behavior_top_left": "off",
"power_on_behavior_top_right": "off",
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_bottom_left":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_bottom_right":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_top_left":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_top_right":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"power_on_behavior_bottom_left":"on"}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Off at night"
mode: single
triggers:
- trigger: time
at: "23:30:00"
actions:
- action: switch.turn_off
target:
entity_id: switch.my_device_bottom_left
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.