What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Power | power | W | read only |
| Power phase b | power_phase_b | W | read only |
| Power phase c | power_phase_c | W | read only |
| Power apparent | power_apparent | VA | read only |
| Power apparent phase b | power_apparent_phase_b | VA | read only |
| Power apparent phase c | power_apparent_phase_c | VA | read only |
| Power alarm active | power_alarm_active | — | read only |
| Power alarm | power_alarm | — | settable |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"power": 12.4,
"power_phase_b": 0,
"power_phase_c": 0,
"power_apparent": 0,
"power_apparent_phase_b": 0,
"power_apparent_phase_c": 0,
"power_alarm_active": false,
"power_alarm": false,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"power_alarm":true}'
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.