What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| On / off (l1) | state_l1 | — | settable |
| On / off (l2) | state_l2 | — | settable |
| On / off (l3) | state_l3 | — | settable |
| On / off (l4) | state_l4 | — | settable |
| On / off (l5) | state_l5 | — | settable |
| On / off (l6) | state_l6 | — | settable |
| On / off (l7) | state_l7 | — | settable |
| On / off (l8) | state_l8 | — | settable |
| Countdown timer | countdown_1 | s · 0…43200 | settable |
| Countdown timer | countdown_2 | s · 0…43200 | settable |
| Countdown timer | countdown_3 | s · 0…43200 | settable |
| Countdown timer | countdown_4 | s · 0…43200 | settable |
| Countdown timer | countdown_5 | s · 0…43200 | settable |
| Countdown timer | countdown_6 | s · 0…43200 | settable |
| Countdown timer | countdown_7 | s · 0…43200 | settable |
| Countdown timer | countdown_8 | s · 0…43200 | settable |
| Child lock | child_lock | — | settable |
| Backlight switch | backlight_switch | — | settable |
| Backlight lightness | backlight_lightness | 1…100 | settable |
| Displayoff delay | displayoff_delay | s · 10…180 | settable |
| Relay status | relay_status | off, on, memory | settable |
| Light mode | light_mode | none, relay, pos | settable |
| On color | on_color | red, orange, green, cyan, blue, purple, magenta, cold_white … | settable |
| Off color | off_color | red, orange, green, cyan, blue, purple, magenta, cold_white … | settable |
| Sw1 name | sw1_name | — | settable |
| Sw2 name | sw2_name | — | settable |
| Sw3 name | sw3_name | — | settable |
| Sw4 name | sw4_name | — | settable |
| Sw5 name | sw5_name | — | settable |
| Sw6 name | sw6_name | — | settable |
| Sw7 name | sw7_name | — | settable |
| Sw8 name | sw8_name | — | settable |
| Press on fun | press_on_fun | disable, press_switch_1, press_switch_2, press_switch_3, press_switch_4, press_switch_5, press_switch_6, press_switch_7 … | settable |
| Press off fun | press_off_fun | disable, press_switch_1, press_switch_2, press_switch_3, press_switch_4, press_switch_5, press_switch_6, press_switch_7 … | settable |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"state_l1": "ON",
"state_l2": "ON",
"state_l3": "ON",
"state_l4": "ON",
"state_l5": "ON",
"state_l6": "ON",
"state_l7": "ON",
"state_l8": "ON",
"countdown_1": 21600,
"countdown_2": 21600,
"countdown_3": 21600,
"countdown_4": 21600,
"countdown_5": 21600,
"countdown_6": 21600,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l1":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l2":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l3":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l4":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l5":"TOGGLE"}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Off at night"
mode: single
triggers:
- trigger: time
at: "23:30:00"
actions:
- action: switch.turn_off
target:
entity_id: switch.my_device_l1
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.