What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Presence | presence | — | read only |
| Illuminance | illuminance | lx | read only |
| Target distance | target_distance | m | read only |
| Radar sensitivity | radar_sensitivity | 0…9 | settable |
| Detection range | detection_range | m · 0…8 | settable |
| Shield range | shield_range | m · 0…8 | settable |
| Entry sensitivity | entry_sensitivity | 0…9 | settable |
| Entry distance indentation | entry_distance_indentation | m · 0…8 | settable |
| Entry filter time | entry_filter_time | s · 0…10 | settable |
| Departure delay | departure_delay | s · 0…600 | settable |
| Block time | block_time | s · 0…10 | settable |
| Breaker status | breaker_status | — | settable |
| Breaker mode | breaker_mode | standard, local | settable |
| Illuminance threshold | illuminance_threshold | lx · 0…420 | settable |
| Status indication | status_indication | OFF, ON | settable |
| Sensor | sensor | on, off, occupied, unoccupied | settable |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"presence": false,
"illuminance": 120,
"target_distance": 0,
"radar_sensitivity": 5,
"detection_range": 4,
"shield_range": 4,
"entry_sensitivity": 5,
"entry_distance_indentation": 4,
"entry_filter_time": 5,
"departure_delay": 300,
"block_time": 5,
"breaker_status": false,
"breaker_mode": "standard",
"illuminance_threshold": 210,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"breaker_status":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"breaker_mode":"local"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"status_indication":"ON"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"sensor":"off"}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Light on motion"
mode: single
triggers:
- trigger: state
entity_id: binary_sensor.my_device_presence
to: "on"
conditions:
- condition: sun
after: sunset
actions:
- action: light.turn_on
target:
entity_id: light.hallway
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.