Schneider Electric CCTFR6000 with Zigbee2MQTT and Home Assistant

What it exposes

Feature	Property	Values	Control
On / off (1)	state_1	—	settable
On / off (2)	state_2	—	settable
On / off (3)	state_3	—	settable
On / off (4)	state_4	—	settable
On / off (5)	state_5	—	settable
On / off (6)	state_6	—	settable
On / off (7)	state_7	—	settable
On / off (8)	state_8	—	settable
Demand percentage (1)	demand_percentage_1	% · 0…100	settable
Demand percentage (2)	demand_percentage_2	% · 0…100	settable
Demand percentage (3)	demand_percentage_3	% · 0…100	settable
Demand percentage (4)	demand_percentage_4	% · 0…100	settable
Demand percentage (5)	demand_percentage_5	% · 0…100	settable
Demand percentage (6)	demand_percentage_6	% · 0…100	settable
Demand percentage (7)	demand_percentage_7	% · 0…100	settable
Demand percentage (8)	demand_percentage_8	% · 0…100	settable
Cycle time (1)	cycle_time_1	s · 300…3200	settable
Cycle time (2)	cycle_time_2	s · 300…3200	settable
Cycle time (3)	cycle_time_3	s · 300…3200	settable
Cycle time (4)	cycle_time_4	s · 300…3200	settable
Cycle time (5)	cycle_time_5	s · 300…3200	settable
Cycle time (6)	cycle_time_6	s · 300…3200	settable
Cycle time (7)	cycle_time_7	s · 300…3200	settable
Cycle time (8)	cycle_time_8	s · 300…3200	settable

MQTT: state and commands

Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:

{
  "state_1": "ON",
  "state_2": "ON",
  "state_3": "ON",
  "state_4": "ON",
  "state_5": "ON",
  "state_6": "ON",
  "state_7": "ON",
  "state_8": "ON",
  "demand_percentage_1": 50,
  "demand_percentage_2": 50,
  "demand_percentage_3": 50,
  "demand_percentage_4": 50,
  "demand_percentage_5": 50,
  "demand_percentage_6": 50,
  "linkquality": 120
}

Send commands to zigbee2mqtt/my_device/set:

mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_1":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_2":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_3":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_4":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_5":"TOGGLE"}'

Watch the topics live from the browser: MQTT client.

Home Assistant automation example

Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:

- alias: "Off at night"
  mode: single
  triggers:
    - trigger: time
      at: "23:30:00"
  actions:
    - action: switch.turn_off
      target:
        entity_id: switch.my_device_1

Check the YAML: YAML checker.

How to pair it

In Zigbee2MQTT click Permit join.
Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
Keep the device close to the coordinator or a router while pairing.
Give it a clear name: MQTT topics and Home Assistant entities are built from it.

Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.

Schneider Electric CCTFR6000

What it exposes

MQTT: state and commands

Home Assistant automation example

How to pair it

Similar devices

More tools: smart home