What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Indicator luminance level | indicator_luminance_level | 0, 20, 40, 60, 80, 100 | settable |
| Indicator color | indicator_color | white, blue | settable |
| Indicator LED | indicator_mode | reverse_with_load, consistent_with_load, always_off, always_on | settable |
| On / off (l1) | state_l1 | — | settable |
| Transition (l1) | transition_l1 | s · 0…300 | settable |
| Motor type 1 | motor_type_1 | ac_motor, pulse_motor | settable |
| Curtain status 1 | curtain_status_1 | stop, opening, closing | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"indicator_luminance_level": "0",
"indicator_color": "white",
"indicator_mode": "reverse_with_load",
"state": "OPEN",
"transition_l1": 150,
"motor_type_1": "ac_motor",
"curtain_status_1": "stop",
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state":"CLOSE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"indicator_luminance_level":"20"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"indicator_color":"blue"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"indicator_mode":"consistent_with_load"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"motor_type_1":"pulse_motor"}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Open the curtains in the morning"
mode: single
triggers:
- trigger: time
at: "07:30:00"
actions:
- action: cover.open_cover
target:
entity_id: cover.my_device
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.