prefixkit Ask an engineerAsk Support RU

Zigbee devices Lights and bulbs

Schneider Electric E8332DST350ZB

Wiser AvatarOn 2G dimmer switch. Works with Zigbee2MQTT with no vendor hub or cloud: it pairs with a Zigbee stick and shows up in Home Assistant.

Vendor
Schneider Electric
Model
E8332DST350ZB
Type
Lights and bulbs
Power
mains: usually a router that extends the mesh
Firmware updates (OTA)
no

Find it in shops: AliExpress

Links open a search in the shop; some are affiliate links: buying through them costs you nothing extra and supports this site. We do not sell devices or get them from manufacturers.

What it exposes

FeaturePropertyValuesControl
Light (l1)state, brightnesson / off, brightnesssettable
Light (l2)state, brightnesson / off, brightnesssettable
Indicator luminance levelindicator_luminance_level0, 20, 40, 60, 80, 100settable
Indicator colorindicator_colorwhite, bluesettable
Indicator LEDindicator_modereverse_with_load, consistent_with_load, always_off, always_onsettable

MQTT: state and commands

Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:

{
  "state_l1": "ON",
  "brightness_l1": 180,
  "state_l2": "ON",
  "brightness_l2": 180,
  "indicator_luminance_level": "0",
  "indicator_color": "white",
  "indicator_mode": "reverse_with_load",
  "linkquality": 120
}

Send commands to zigbee2mqtt/my_device/set:

mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l1":"ON","brightness_l1":180}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l1":"OFF","transition":2}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l2":"ON","brightness_l2":180}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l2":"OFF","transition":2}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"indicator_luminance_level":"20"}'

Watch the topics live from the browser: MQTT client.

Home Assistant automation example

Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:

- alias: "Light at sunset"
  mode: single
  triggers:
    - trigger: sun
      event: sunset
      offset: "-00:15:00"
  actions:
    - action: light.turn_on
      target:
        entity_id: light.my_device
      data:
        brightness_pct: 70

Check the YAML: YAML checker.

How to pair it

  1. In Zigbee2MQTT click Permit join.
  2. Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
  3. Keep the device close to the coordinator or a router while pairing.
  4. Give it a clear name: MQTT topics and Home Assistant entities are built from it.

Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.

Similar devices

More tools: smart home

Home Assistant tools newEverything for the smart home section in one place.Remote access to Home Assistant newCloudflare Tunnel, nginx, Caddy, WireGuard configs.ESPHome generator newBoard and sensors to a ready YAML with keys.Zigbee coordinator picker newWhich stick for ZHA, Zigbee2MQTT and Thread.Zigbee device catalog new5,400 devices: features, MQTT, automations.ESP32 pinout newWhich GPIOs are safe: ESP32, C3, S3, ESP8266.MQTT discovery generator newConfig topic and JSON for Home Assistant.Zigbee channel vs Wi-Fi newPick a Zigbee channel clear of your Wi-Fi.Camera RTSP URL newHikvision, Dahua, Reolink, Tapo stream URLs.Frigate config generator newCameras, go2rtc, Coral or OpenVINO.Zigbee2MQTT config newAdapter, port, MQTT, channel.Home Assistant Docker Compose newHA, Mosquitto, Zigbee2MQTT, ESPHome stack.Mosquitto config newPasswords, ACL, WebSocket, TLS.MQTT client newTest a broker over WebSocket in the browser.Home Assistant YAML checker newAutomations and configuration.yaml mistakes.
Idea?