What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Switch (p1) | state_p1 | — | settable |
| Switch (p2) | state_p2 | — | settable |
| Switch (p3) | state_p3 | — | settable |
| Switch (p4) | state_p4 | — | settable |
| Power (p1) | power_p1 | W | read only |
| Power (p2) | power_p2 | W | read only |
| Power (p3) | power_p3 | W | read only |
| Power (p4) | power_p4 | W | read only |
| Energy (p1) | energy_p1 | kWh | read only |
| Energy (p2) | energy_p2 | kWh | read only |
| Energy (p3) | energy_p3 | kWh | read only |
| Energy (p4) | energy_p4 | kWh | read only |
| Button lock mode (p1) | button_lock_mode_p1 | — | settable |
| Button lock mode (p2) | button_lock_mode_p2 | — | settable |
| Button lock mode (p3) | button_lock_mode_p3 | — | settable |
| Button lock mode (p4) | button_lock_mode_p4 | — | settable |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"state_p1": "ON",
"state_p2": "ON",
"state_p3": "ON",
"state_p4": "ON",
"power_p1": 0,
"power_p2": 0,
"power_p3": 0,
"power_p4": 0,
"energy_p1": 0,
"energy_p2": 0,
"energy_p3": 0,
"energy_p4": 0,
"button_lock_mode_p1": false,
"button_lock_mode_p2": false,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_p1":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_p2":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_p3":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_p4":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"button_lock_mode_p1":true}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Off at night"
mode: single
triggers:
- trigger: time
at: "23:30:00"
actions:
- action: switch.turn_off
target:
entity_id: switch.my_device_p1
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.