prefixkit Ask an engineerAsk Support RU

Zigbee devices Curtains and blinds

Third Reality 3RSB02015Z

Third Reality Blind Gen2. Works with Zigbee2MQTT with no vendor hub or cloud: it pairs with a Zigbee stick and shows up in Home Assistant.

Vendor
Third Reality
Model
3RSB02015Z
Type
Curtains and blinds
Power
battery: an end device, does not extend the mesh
Firmware updates (OTA)
yes, through Zigbee2MQTT

Find it in shops: AliExpress

Links open a search in the shop; some are affiliate links: buying through them costs you nothing extra and supports this site. We do not sell devices or get them from manufacturers.

What it exposes

FeaturePropertyValuesControl
Batterybattery% · 0…100read only
On / offstate—settable
Ir remoteir_remote—settable
Bottom balance adjustmentbottom_balance_adjustment-100…100settable
Preset bottom positionpreset_bottom_position50…4100settable
Estimated usable curtain cyclesestimated_usable_curtain_cycles200…334settable
Battery level at last power offbattery_level_at_last_power_off0…100read only
Action (button press)actionopen, close, stopread only

MQTT: state and commands

Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:

{
  "battery": 87,
  "state": "OPEN",
  "ir_remote": false,
  "bottom_balance_adjustment": 0,
  "preset_bottom_position": 2075,
  "estimated_usable_curtain_cycles": 267,
  "battery_level_at_last_power_off": 50,
  "linkquality": 120
}

Send commands to zigbee2mqtt/my_device/set:

mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state":"CLOSE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"ir_remote":true}'

Watch the topics live from the browser: MQTT client.

Home Assistant automation example

Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:

- alias: "Open the curtains in the morning"
  mode: single
  triggers:
    - trigger: time
      at: "07:30:00"
  actions:
    - action: cover.open_cover
      target:
        entity_id: cover.my_device

Check the YAML: YAML checker.

How to pair it

  1. In Zigbee2MQTT click Permit join.
  2. Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
  3. Keep the device close to the coordinator or a router while pairing.
  4. Give it a clear name: MQTT topics and Home Assistant entities are built from it.

Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.

Similar devices

Idea?