What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Battery | battery | % · 0…100 | read only |
| Child lock | child_lock | — | settable |
| Max temperature limit | max_temperature_limit | °C · 15…45 | settable |
| Min temperature limit | min_temperature_limit | °C · 5…15 | settable |
| Open window detection | window_detection | — | settable |
| Open window temperature | open_window_temperature | °C · 5…30 | settable |
| Comfort temperature | comfort_temperature | °C · 5…35 | settable |
| Eco temperature | eco_temperature | °C · 5…35 | settable |
| Holiday temperature | holiday_temperature | °C · 5…35 | settable |
| Climate | preset, local_temperature_calibration, local_temperature, current_heating_setpoint, system_mode, running_state | preset, local_temperature_calibration, room temperature, heating setpoint, mode, running state | settable |
| Frost protection | frost_protection | — | settable |
| Boost time | boost_time | min · 0…1440 | settable |
| Boost timeset countdown | boost_timeset_countdown | min | read only |
| Valve | valve | — | read only |
| Factory reset | factory_reset | — | settable |
| Error status | error_status | — | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"battery": 87,
"child_lock": false,
"max_temperature_limit": 30,
"min_temperature_limit": 10,
"open_window_temperature": 18,
"comfort_temperature": 20,
"eco_temperature": 20,
"holiday_temperature": 20,
"local_temperature": 20.5,
"current_heating_setpoint": 21,
"system_mode": "heat",
"frost_protection": false,
"boost_time": 720,
"boost_timeset_countdown": 0,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"current_heating_setpoint":21.5}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"system_mode":"heat"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"child_lock":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"frost_protection":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"factory_reset":true}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Cooler at night"
mode: single
triggers:
- trigger: time
at: "23:00:00"
actions:
- action: climate.set_temperature
target:
entity_id: climate.my_device
data:
temperature: 18
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.