What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Voltage X | voltage_X | V | read only |
| Voltage Y | voltage_Y | V | read only |
| Voltage Z | voltage_Z | V | read only |
| Power X | power_X | W | read only |
| Power Y | power_Y | W | read only |
| Power Z | power_Z | W | read only |
| Current X | current_X | A | read only |
| Current Y | current_Y | A | read only |
| Current Z | current_Z | A | read only |
| Energy | energy | kWh | read only |
| Produced energy | produced_energy | kWh | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"voltage_X": 0,
"voltage_Y": 0,
"voltage_Z": 0,
"power_X": 0,
"power_Y": 0,
"power_Z": 0,
"current_X": 0,
"current_Y": 0,
"current_Z": 0,
"energy": 3.21,
"produced_energy": 0,
"linkquality": 120
}
The device only reports data and takes no commands.
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.