What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Fan speed | fan_speed | % · 0…100 | settable |
| After power loss | power_on_behavior | off, on, previous | settable |
| Light switch | light_switch | — | settable |
| Indicator | indicator | off, off/on, on | settable |
| Child lock | child_lock | — | settable |
| Minimum speed | minimum_speed | % · 0…100 | settable |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"fan_speed": 50,
"power_on_behavior": "off",
"light_switch": false,
"indicator": "off",
"child_lock": false,
"minimum_speed": 50,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"power_on_behavior":"on"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"light_switch":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"indicator":"off/on"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"child_lock":true}'
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.