Ubisys H10

What it exposes

MQTT: state and commands

Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:

{
  "state_l1": "ON",
  "state_l2": "ON",
  "state_l3": "ON",
  "state_l4": "ON",
  "state_l5": "ON",
  "state_l6": "ON",
  "state_l7": "ON",
  "state_l8": "ON",
  "state_l9": "ON",
  "state_l10": "ON",
  "occupied_heating_setpoint": 21,
  "local_temperature": 20.5,
  "system_mode": "heat",
  "linkquality": 120
}

Send commands to zigbee2mqtt/my_device/set:

mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l1":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l2":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l3":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l4":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_l5":"TOGGLE"}'

Watch the topics live from the browser: MQTT client.

Home Assistant automation example

Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:

- alias: "Cooler at night"
  mode: single
  triggers:
    - trigger: time
      at: "23:00:00"
  actions:
    - action: climate.set_temperature
      target:
        entity_id: climate.my_device
      data:
        temperature: 18

Check the YAML: YAML checker.

How to pair it

1. In Zigbee2MQTT click Permit join.
2. Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
3. Keep the device close to the coordinator or a router while pairing.
4. Give it a clear name: MQTT topics and Home Assistant entities are built from it.

Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.

Similar devices

• Ubisys H1
• Tuya ZG-WK-DA-Wh-Zigbee
• Tuya ZWT07
• Tuya ZWT198/ZWT100-BH
• Vareo HYT001ZB
• Viessmann ZK03840
• Vimar 02973.B
• Woox R7067