What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Restart (4) | restart_4 | seconds · 1…30 | settable |
| Identify | identify | identify | settable |
| Power (1) | power_1 | W | read only |
| Voltage (1) | voltage_1 | V | read only |
| Current (1) | current_1 | A | read only |
| Temperature | temperature | °C | read only |
| On / off (1) | state_1 | — | settable |
| After power loss (1) | power_on_behavior_1 | off, on, toggle, previous | settable |
| On / off (2) | state_2 | — | settable |
| On / off (3) | state_3 | — | settable |
| Alarm 1 | alarm_1 | — | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"restart_4": 16,
"power_1": 12.4,
"voltage_1": 230,
"current_1": 0.06,
"temperature": 21.6,
"state_1": "ON",
"power_on_behavior_1": "off",
"state_2": "ON",
"state_3": "ON",
"alarm_1": false,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_1":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_2":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_3":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"power_on_behavior_1":"on"}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Turn off when idle"
mode: single
triggers:
- trigger: numeric_state
entity_id: sensor.my_device_power
below: 2
for: "00:15:00"
actions:
- action: switch.turn_off
target:
entity_id: switch.my_device_1
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.