What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Device temperature | device_temperature | °C | read only |
| Power | power | W | read only |
| Energy | energy | kWh | read only |
| Voltage | voltage | V | read only |
| Current | current | A | read only |
| Led indicator | led_indicator | — | settable |
| Flip indicator light | flip_indicator_light | — | settable |
| After power loss | power_on_behavior | on, previous, off, inverted | settable |
| Light | state, brightness, level_config | on / off, brightness, level settings | settable |
| Light effect | effect | blink, breathe, okay, channel_change, finish_effect, stop_effect | settable |
| Action rotation angle | action_rotation_angle | * | read only |
| Action rotation angle speed | action_rotation_angle_speed | * | read only |
| Action rotation percent | action_rotation_percent | % | read only |
| Action rotation percent speed | action_rotation_percent_speed | % | read only |
| Action rotation time | action_rotation_time | ms | read only |
| Action rotation button state | action_rotation_button_state | released, pressed | read only |
| Operation mode | operation_mode | decoupled, control_relay | settable |
| Multi click | multi_click | — | settable |
| Mode switch | mode_switch | quick_mode, anti_flicker_mode | settable |
| Event mode | event_mode | command, event | settable |
| Sensitivity | sensitivity | low, medium, high | settable |
| Phase | phase | forward, reverse | settable |
| Min brightness | min_brightness | % · 0…99 | settable |
| Max brightness | max_brightness | % · 1…100 | settable |
| Action (button press) | action | start_rotating, rotation, stop_rotating, hold, single, double, release | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"device_temperature": 31,
"power": 12.4,
"energy": 3.21,
"voltage": 230,
"current": 0.06,
"led_indicator": false,
"flip_indicator_light": false,
"power_on_behavior": "on",
"state": "ON",
"brightness": 180,
"action_rotation_angle": 0,
"action_rotation_angle_speed": 0,
"action_rotation_percent": 0,
"action_rotation_percent_speed": 0,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state":"ON","brightness":180}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state":"OFF","transition":2}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"led_indicator":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"flip_indicator_light":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"power_on_behavior":"previous"}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Light at sunset"
mode: single
triggers:
- trigger: sun
event: sunset
offset: "-00:15:00"
actions:
- action: light.turn_on
target:
entity_id: light.my_device
data:
brightness_pct: 70
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.