What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| On / off (top) | state_top | — | settable |
| On / off (center) | state_center | — | settable |
| On / off (bottom) | state_bottom | — | settable |
| Device temperature | device_temperature | °C | read only |
| Power outage count | power_outage_count | — | read only |
| After power loss | power_on_behavior | on, previous, off, inverted | settable |
| Operation mode (top) | operation_mode_top | decoupled, control_relay | settable |
| Operation mode (center) | operation_mode_center | decoupled, control_relay | settable |
| Operation mode (bottom) | operation_mode_bottom | decoupled, control_relay | settable |
| Lock relay (top) | lock_relay_top | — | settable |
| Lock relay (center) | lock_relay_center | — | settable |
| Lock relay (bottom) | lock_relay_bottom | — | settable |
| Energy | energy | kWh | read only |
| Voltage | voltage | V | read only |
| Current | current | A | read only |
| Power | power | W | read only |
| Led disabled night | led_disabled_night | — | settable |
| Click mode | click_mode | fast, multi | settable |
| Action slide time | action_slide_time | ms | read only |
| Action slide speed | action_slide_speed | mm/s | read only |
| Action slide relative displacement | action_slide_relative_displacement | — | read only |
| Action slide time delta | action_slide_time_delta | ms | read only |
| Mode switch | mode_switch | quick_mode, anti_flicker_mode | settable |
| Action (button press) | action | hold_top, hold_center, hold_bottom, hold_wireless, single_top, single_center, single_bottom, single_wireless … | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"state_top": "ON",
"state_center": "ON",
"state_bottom": "ON",
"device_temperature": 31,
"power_outage_count": 0,
"power_on_behavior": "on",
"operation_mode_top": "decoupled",
"operation_mode_center": "decoupled",
"operation_mode_bottom": "decoupled",
"lock_relay_top": false,
"lock_relay_center": false,
"lock_relay_bottom": false,
"energy": 3.21,
"voltage": 230,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_top":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_center":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_bottom":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"power_on_behavior":"previous"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"operation_mode_top":"control_relay"}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Turn off when idle"
mode: single
triggers:
- trigger: numeric_state
entity_id: sensor.my_device_power
below: 2
for: "00:15:00"
actions:
- action: switch.turn_off
target:
entity_id: switch.my_device_top
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.