What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Smoke sensor state | smoke_sensor_state | alarm, normal | read only |
| Self checking | self_checking | — | settable |
| Fault | fault | — | read only |
| Battery | battery | % · 0…100 | read only |
| Muffling | muffling | — | settable |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"smoke_sensor_state": "alarm",
"self_checking": false,
"battery": 87,
"muffling": false,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"self_checking":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"muffling":true}'
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.