What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Voltage | voltage_l1 | V | read only |
| Power | power_l1 | W | read only |
| Current | current_l1 | A | read only |
| Energy | energy_l1 | kWh | read only |
| Daily energy l1 | daily_energy_l1 | kWh | read only |
| Voltage | voltage_l2 | V | read only |
| Power | power_l2 | W | read only |
| Current | current_l2 | A | read only |
| Energy | energy_l2 | kWh | read only |
| Daily energy l2 | daily_energy_l2 | kWh | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"voltage_l1": 230,
"power_l1": 12.4,
"current_l1": 0.06,
"energy_l1": 3.21,
"daily_energy_l1": 0,
"voltage_l2": 230,
"power_l2": 12.4,
"current_l2": 0.06,
"energy_l2": 3.21,
"daily_energy_l2": 0,
"linkquality": 120
}
The device only reports data and takes no commands.
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.