What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Last received command | last_received_command | — | read only |
| Send command | send_command | — | settable |
| Ac kfid offset model | ac_kfid_offset_model | — | read only |
| Ac power | ac_power | — | settable |
| Ac mode | ac_mode | auto, cooling, dehumidification, air_supply, heating | settable |
| Ac temperature | ac_temperature | °C · 16…32 | settable |
| Ac wind speed | ac_wind_speed | auto, low, medium, high, strong | settable |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"ac_power": false,
"ac_mode": "auto",
"ac_temperature": 24,
"ac_wind_speed": "auto",
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"ac_power":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"ac_mode":"cooling"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"ac_wind_speed":"low"}'
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.