What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Status | status | plugged_out, off, plugged_in_charging, plugged_in_paused, plugged_in, stopped | read only |
| Start charging | charging_start | start | settable |
| Stop charging | charging_stop | stop | settable |
| Pause charging | charging_pause | pause | settable |
| Setpoint charging current | setpoint_charging_current | A · 6…32 | settable |
| Auto charge | auto_charge | — | settable |
| Plug locked when not charging | plug_locked_permanently | — | settable |
| On / off | state | UNLOCK | settable |
| Charging current limit | charging_current_limit | A · 6…32 | settable |
| Session energy | session_energy | kWh | read only |
| Energy meter start | energy_meter_start | kWh | read only |
| Energy meter now | energy_meter_now | kWh | read only |
| Charging duration | charging_duration | s | read only |
| Power | power | W | read only |
| Voltage | voltage | V | read only |
| Current | current | A | read only |
| Energy | energy | kWh | read only |
| Voltage phase B | voltage_phase_b | V | read only |
| Voltage phase C | voltage_phase_c | V | read only |
| Current phase B | current_phase_b | A | read only |
| Current phase C | current_phase_c | A | read only |
| Is charging | is_charging | — | read only |
| Charging start datetime | charging_start_datetime | — | read only |
| Charging end datetime | charging_end_datetime | — | read only |
| Is plug connected | is_plug_connected | — | read only |
| Connected start datetime | connected_start_datetime | — | read only |
| Connected end datetime | connected_end_datetime | — | read only |
| Plug lock state | plug_lock_state | — | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"status": "plugged_out",
"charging_start": "start",
"charging_stop": "stop",
"charging_pause": "pause",
"setpoint_charging_current": 19,
"auto_charge": false,
"plug_locked_permanently": false,
"state": "UNLOCK",
"charging_current_limit": 19,
"session_energy": 0,
"energy_meter_start": 0,
"energy_meter_now": 0,
"charging_duration": 0,
"power": 12.4,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"auto_charge":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"plug_locked_permanently":true}'
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.