What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Climate | local_temperature, current_heating_setpoint, local_temperature_calibration, preset, running_state | room temperature, heating setpoint, local_temperature_calibration, preset, running state | settable |
| Open window detection | window_detection | — | settable |
| Child lock | child_lock | — | settable |
| Frost protection | frost_protection | — | settable |
| Eco | eco | — | settable |
| Eco temperature | eco_temperature | °C · 5…35 | settable |
| Window | window | — | read only |
| Min temperature | min_temperature | °C · 5…15 | settable |
| Max temperature | max_temperature | °C · 20…35 | settable |
| Position | position | % | read only |
| Battery | battery | % · 0…100 | read only |
| Screen orientation | screen_orientation | 0, 1 | settable |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"local_temperature": 20.5,
"current_heating_setpoint": 21,
"window_detection": false,
"child_lock": false,
"frost_protection": false,
"eco": false,
"eco_temperature": 20,
"window": false,
"min_temperature": 10,
"max_temperature": 28,
"position": 100,
"battery": 87,
"screen_orientation": "0",
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"current_heating_setpoint":21.5}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"window_detection":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"child_lock":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"frost_protection":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"eco":true}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Cooler at night"
mode: single
triggers:
- trigger: time
at: "23:00:00"
actions:
- action: climate.set_temperature
target:
entity_id: climate.my_device
data:
temperature: 18
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.