What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Current | current | A | read only |
| Power | power | W | read only |
| Power reactive | power_reactive | VAR | read only |
| Energy | energy | kWh | read only |
| Reactive energy | reactive_energy | kVArh | read only |
| Voltage | voltage_l1 | V | read only |
| Voltage | voltage_l2 | V | read only |
| Voltage | voltage_l3 | V | read only |
| Current | current_l1 | A | read only |
| Current | current_l2 | A | read only |
| Current | current_l3 | A | read only |
| Energy | energy_l1 | kWh | read only |
| Energy | energy_l2 | kWh | read only |
| Energy | energy_l3 | kWh | read only |
| Reactive energy l1 | reactive_energy_l1 | kVArh | read only |
| Reactive energy l2 | reactive_energy_l2 | kVArh | read only |
| Reactive energy l3 | reactive_energy_l3 | kVArh | read only |
| Power | power_l1 | W | read only |
| Power | power_l2 | W | read only |
| Power | power_l3 | W | read only |
| Reactive power l1 | reactive_power_l1 | VAr | read only |
| Reactive power l2 | reactive_power_l2 | VAr | read only |
| Reactive power l3 | reactive_power_l3 | VAr | read only |
| Power factor | power_factor_l1 | % | read only |
| Power factor | power_factor_l2 | % | read only |
| Power factor | power_factor_l3 | % | read only |
| Clear metering | clear_metering | clear | settable |
| Min report cycle | min_report_cycle | s · 1…3600 | settable |
| Max report cycle | max_report_cycle | s · 1…3600 | settable |
| Percent change in power | percent_change_in_power | % · 1…100 | settable |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"current": 0.06,
"power": 12.4,
"power_reactive": 0,
"energy": 3.21,
"reactive_energy": 0,
"voltage_l1": 230,
"voltage_l2": 230,
"voltage_l3": 230,
"current_l1": 0.06,
"current_l2": 0.06,
"current_l3": 0.06,
"energy_l1": 3.21,
"energy_l2": 3.21,
"energy_l3": 3.21,
"linkquality": 120
}
The device only reports data and takes no commands.
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.