What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Contact (closed) | contact | — | read only |
| Temperature | temperature | °C | read only |
| Battery | battery | % · 0…100 | read only |
| Voltage | voltage | mV | read only |
| Pulse frequency | pulse_frequency | Hz | read only |
| Pulse count | pulse_count | — | read only |
| Operating mode | operating_mode | contact, counter | settable |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"contact": true,
"temperature": 21.6,
"battery": 87,
"voltage": 2950,
"pulse_frequency": 0,
"pulse_count": 0,
"operating_mode": "contact",
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"operating_mode":"counter"}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Door opened"
mode: single
triggers:
- trigger: state
entity_id: binary_sensor.my_device_contact
to: "on"
actions:
- action: notify.notify
data:
message: "The door was opened"
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.