What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Battery | battery | % · 0…100 | read only |
| Voltage | voltage | mV | read only |
| Occupancy in | occupancy_in | — | read only |
| Occupancy out | occupancy_out | — | read only |
| Occupancy or | occupancy_or | — | read only |
| Occupancy and | occupancy_and | — | read only |
| Occupancy timeout | occupancy_timeout | s · 0…3600 | settable |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"battery": 87,
"voltage": 2950,
"occupancy_in": false,
"occupancy_out": false,
"occupancy_or": false,
"occupancy_and": false,
"occupancy_timeout": 1800,
"linkquality": 120
}
The device only reports data and takes no commands.
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.