What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Power | power | W | read only |
| Power apparent | power_apparent | VA | read only |
| Power phase a | power_phase_a | W | read only |
| Power phase b | power_phase_b | W | read only |
| Power phase c | power_phase_c | W | read only |
| Power factor | power_factor | — | read only |
| Energy | energy | kWh | read only |
| Energy phase a | energy_phase_a | kWh | read only |
| Energy phase b | energy_phase_b | kWh | read only |
| Energy phase c | energy_phase_c | kWh | read only |
| AC frequency | ac_frequency | Hz | read only |
| Voltage phase a | voltage_phase_a | V | read only |
| Voltage phase b | voltage_phase_b | V | read only |
| Voltage phase c | voltage_phase_c | V | read only |
| Voltage phase ab | voltage_phase_ab | V | read only |
| Voltage phase bc | voltage_phase_bc | V | read only |
| Voltage phase ca | voltage_phase_ca | V | read only |
| Current phase a | current_phase_a | A | read only |
| Current phase b | current_phase_b | A | read only |
| Current phase c | current_phase_c | A | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"power": 12.4,
"power_apparent": 0,
"power_phase_a": 0,
"power_phase_b": 0,
"power_phase_c": 0,
"power_factor": 0,
"energy": 3.21,
"energy_phase_a": 0,
"energy_phase_b": 0,
"energy_phase_c": 0,
"ac_frequency": 0,
"voltage_phase_a": 0,
"voltage_phase_b": 0,
"voltage_phase_c": 0,
"linkquality": 120
}
The device only reports data and takes no commands.
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.