What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Voltage | voltage | V | read only |
| Current | current | A | read only |
| Power | power | W | read only |
| Energy | energy | kWh | read only |
| Reactive power threshold | reactive_power_threshold | W · 3…30 | settable |
| Max effective power | max_effective_power | W · 0…4800 | settable |
| Status report | status_report | ON, OFF | settable |
| Switch status | switch_status | ON, OFF | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"voltage": 230,
"current": 0.06,
"power": 12.4,
"energy": 3.21,
"reactive_power_threshold": 17,
"max_effective_power": 2400,
"status_report": "ON",
"switch_status": "ON",
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"status_report":"OFF"}'
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.