What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Water flow | water_flow | % | read only |
| Last watering duration | last_watering_duration | sec | read only |
| Remaining watering time | remaining_watering_time | sec | read only |
| Valve state | valve_state | % · 0…100 | settable |
| Valve state auto shutdown | valve_state_auto_shutdown | % · 0…100 | settable |
| Shutdown timer | shutdown_timer | sec · 0…14400 | settable |
| Battery | battery | % · 0…100 | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"water_flow": 0,
"last_watering_duration": 0,
"remaining_watering_time": 0,
"valve_state": 50,
"valve_state_auto_shutdown": 50,
"shutdown_timer": 7200,
"battery": 87,
"linkquality": 120
}
The device only reports data and takes no commands.
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.