What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Switch (lights) | state_lights | — | settable |
| Switch (low) | state_low | — | settable |
| Switch (medium) | state_medium | — | settable |
| Switch (high) | state_high | — | settable |
| Backlight | backlight_mode | red_when_on, pink_when_on, red_on_blue_off, pink_on_blue_off | settable |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"state_lights": "ON",
"state_low": "ON",
"state_medium": "ON",
"state_high": "ON",
"backlight_mode": "red_when_on",
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_lights":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_low":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_medium":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_high":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"backlight_mode":"pink_when_on"}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Off at night"
mode: single
triggers:
- trigger: time
at: "23:30:00"
actions:
- action: switch.turn_off
target:
entity_id: switch.my_device_lights
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.