What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Switch (s1) | state_s1 | — | settable |
| Switch (s2) | state_s2 | — | settable |
| Switch (s3) | state_s3 | — | settable |
| Switch (s4) | state_s4 | — | settable |
| Switch (s5) | state_s5 | — | settable |
| Switch (s6) | state_s6 | — | settable |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"state_s1": "ON",
"state_s2": "ON",
"state_s3": "ON",
"state_s4": "ON",
"state_s5": "ON",
"state_s6": "ON",
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_s1":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_s2":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_s3":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_s4":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_s5":"TOGGLE"}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Off at night"
mode: single
triggers:
- trigger: time
at: "23:30:00"
actions:
- action: switch.turn_off
target:
entity_id: switch.my_device_s1
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.