What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Fan Control | fan_state | — | settable |
| Silent mode | silent_mode | inactive, active | settable |
| Heating/Cooling | heating_cooling | heating, cooling | settable |
| Electric Valve | electric_valve | off, on | settable |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"silent_mode": "inactive",
"heating_cooling": "heating",
"electric_valve": "off",
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"silent_mode":"active"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"heating_cooling":"cooling"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"electric_valve":"on"}'
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.