What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Energy | energy | kWh | read only |
| Voltage | voltage | V | read only |
| Current | current | A | read only |
| Power | power | W | read only |
| AC frequency | ac_frequency | Hz | read only |
| Reverse energy | reverse_energy | kWh | read only |
| Fault | fault | — | read only |
| Over current threshold | over_current_threshold | A · 1…63 | settable |
| Clear accumulated energy | clear_event | — | settable |
| Refresh measurements | refresh_measurements | press | settable |
| Active energy | active_energy | kWh | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"energy": 3.21,
"voltage": 230,
"current": 0.06,
"power": 12.4,
"ac_frequency": 0,
"reverse_energy": 0,
"fault": 0,
"over_current_threshold": 32,
"clear_event": false,
"refresh_measurements": "press",
"active_energy": 0,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"clear_event":true}'
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.