What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Zone count | zone_count | — | read only |
| Active zones | active_zones | — | read only |
| Hob power | hob_power | % · 0…100 | read only |
| Extractor demand | extractor_demand | % · 0…100 | read only |
| Zone 0 state | zone_0_state | — | read only |
| Zone 0 power | zone_0_power | 0…9 | read only |
| Zone 0 mode | zone_0_mode | off, normal, twin_booster_1, twin_booster_2, keep_warm, keep_warm_plus, tempcontrol_fry_1, tempcontrol_fry_2 … | read only |
| Zone 1 state | zone_1_state | — | read only |
| Zone 1 power | zone_1_power | 0…9 | read only |
| Zone 1 mode | zone_1_mode | off, normal, twin_booster_1, twin_booster_2, keep_warm, keep_warm_plus, tempcontrol_fry_1, tempcontrol_fry_2 … | read only |
| Zone 2 state | zone_2_state | — | read only |
| Zone 2 power | zone_2_power | 0…9 | read only |
| Zone 2 mode | zone_2_mode | off, normal, twin_booster_1, twin_booster_2, keep_warm, keep_warm_plus, tempcontrol_fry_1, tempcontrol_fry_2 … | read only |
| Zone 3 state | zone_3_state | — | read only |
| Zone 3 power | zone_3_power | 0…9 | read only |
| Zone 3 mode | zone_3_mode | off, normal, twin_booster_1, twin_booster_2, keep_warm, keep_warm_plus, tempcontrol_fry_1, tempcontrol_fry_2 … | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"zone_count": 0,
"active_zones": 0,
"hob_power": 50,
"extractor_demand": 50,
"zone_0_state": false,
"zone_0_power": 5,
"zone_0_mode": "off",
"zone_1_state": false,
"zone_1_power": 5,
"zone_1_mode": "off",
"zone_2_state": false,
"zone_2_power": 5,
"zone_2_mode": "off",
"zone_3_state": false,
"linkquality": 120
}
The device only reports data and takes no commands.
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.