What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| EAST | current_summ_delivered | kWh | read only |
| EAIT | current_summ_received | kWh | read only |
| EASF01 | current_tier1_summ_delivered | kWh | read only |
| EASF02 | current_tier2_summ_delivered | kWh | read only |
| EASF03 | current_tier3_summ_delivered | kWh | read only |
| EASF04 | current_tier4_summ_delivered | kWh | read only |
| EASF05 | current_tier5_summ_delivered | kWh | read only |
| EASF06 | current_tier6_summ_delivered | kWh | read only |
| EASF07 | current_tier7_summ_delivered | kWh | read only |
| EASF08 | current_tier8_summ_delivered | kWh | read only |
| EASF09 | current_tier9_summ_delivered | kWh | read only |
| EASF10 | current_tier10_summ_delivered | kWh | read only |
| ADSC | meter_serial_number | — | read only |
| PRM | site_id | — | read only |
| PREF | available_power | kVA | read only |
| PCOUP | power_threshold | kVA | read only |
| VTIC | software_revision | — | read only |
| CCASN | active_power | W | read only |
| CCASN-1 | active_power_ph_b | W | read only |
| UMOY1 | average_rms_voltage_meas_period | V | read only |
| ERQ1 | total_reactive_power | VArh | read only |
| ERQ2 | reactive_power | VArh | read only |
| ERQ3 | reactive_power_ph_b | VArh | read only |
| ERQ4 | reactive_power_ph_c | VArh | read only |
| IRMS1 | rms_current | A | read only |
| URMS1 | rms_voltage | V | read only |
| EASD01 | active_energy_out_d01 | kWh | read only |
| EASD02 | active_energy_out_d02 | kWh | read only |
| EASD03 | active_energy_out_d03 | kWh | read only |
| EASD04 | active_energy_out_d04 | kWh | read only |
| DATE | current_date | — | read only |
| NTARF | current_index_tarif | — | read only |
| LTARF | current_price | — | read only |
| NGTF | current_tarif | — | read only |
| NJOURF | days_number_current_calendar | — | read only |
| NJOURF+1 | days_number_next_calendar | — | read only |
| PJOURF+1 | days_profile_current_calendar | — | read only |
| PPOINTE1 | days_profile_next_calendar | — | read only |
| CCAIN | injected_active_load_n | W | read only |
| CCAIN-1 | injected_active_load_n1 | W | read only |
| SINSTI | injected_v_a | VA | read only |
| SMAXIN | injected_v_a_max_n | VA | read only |
| SMAXIN-1 | injected_v_a_max_n1 | VA | read only |
| MSG1 | message1 | — | read only |
| MSG2 | message2 | — | read only |
| RELAIS | relais | — | read only |
| DPM1 | start_mobile_point1 | — | read only |
| DPM2 | start_mobile_point2 | — | read only |
| DPM3 | start_mobile_point3 | — | read only |
| STGE | status_register | — | read only |
| FPM1 | stop_mobile_point1 | — | read only |
| FPM2 | stop_mobile_point2 | — | read only |
| FPM3 | stop_mobile_point3 | — | read only |
| SMAXSN | active_power_max | VA | read only |
| SINSTS | apparent_power | VA | read only |
| SMAXSN-1 | drawn_v_a_max_n1 | VA | read only |
| SMAXSN2 | active_power_max_ph_b | VA | read only |
| SMAXSN3 | active_power_max_ph_c | VA | read only |
| SINSTS2 | apparent_power_ph_b | VA | read only |
| SINSTS3 | apparent_power_ph_c | VA | read only |
| SINSTS | total_apparent_power | VA | read only |
| UMOY3 | average_rms_voltage_meas_period_ph_c | V | read only |
| UMOY2 | average_rms_voltage_measure_period_ph_b | V | read only |
| IRMS2 | rms_current_ph_b | A | read only |
| IRMS3 | rms_current_ph_c | A | read only |
| URMS2 | rms_voltage_ph_b | V | read only |
| URMS3 | rms_voltage_ph_c | V | read only |
| SMAXSN2-1 | drawn_v_a_max_n1_p2 | VA | read only |
| SMAXSN3-1 | drawn_v_a_max_n1_p3 | VA | read only |
| PTEC | active_register_tier_delivered | — | read only |
| MOTDETAT | MOTDETAT | — | read only |
| PEJP | start_notice_e_j_p | min | read only |
| DEMAIN | tomorrow_color | — | read only |
| IMAX | rms_current_max | A | read only |
| ADPS | warn_d_p_s | A | read only |
| IMAX2 | rms_current_max_ph_b | A | read only |
| IMAX3 | rms_current_max_ph_c | A | read only |
| PPOT | presence_potential | — | read only |
| ADIR1 | warn_d_i_r1 | A | read only |
| ADIR2 | warn_d_i_r2 | A | read only |
| ADIR3 | warn_d_i_r3 | A | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"current_summ_delivered": 0,
"current_summ_received": 0,
"current_tier1_summ_delivered": 0,
"current_tier2_summ_delivered": 0,
"current_tier3_summ_delivered": 0,
"current_tier4_summ_delivered": 0,
"current_tier5_summ_delivered": 0,
"current_tier6_summ_delivered": 0,
"current_tier7_summ_delivered": 0,
"current_tier8_summ_delivered": 0,
"current_tier9_summ_delivered": 0,
"current_tier10_summ_delivered": 0,
"available_power": 0,
"power_threshold": 0,
"linkquality": 120
}
The device only reports data and takes no commands.
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.