What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Alarm status | alarm_status | normal, alarm | read only |
| Alarm switch | alarm_switch | mute, alarm | settable |
| Alarm ringtone | alarm_ringtone | ring1, ring2, ring3 | settable |
| Battery | battery | % · 0…100 | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"alarm_status": "normal",
"alarm_switch": "mute",
"alarm_ringtone": "ring1",
"battery": 87,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"alarm_switch":"alarm"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"alarm_ringtone":"ring2"}'
Watch the topics live from the browser: MQTT client.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.