What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| On / off | state | — | settable |
| Climate | current_heating_setpoint, running_state, preset, local_temperature_calibration, local_temperature | heating setpoint, running state, preset, local_temperature_calibration, room temperature | settable |
| Child lock | child_lock | — | settable |
| Sensor mode | sensor_mode | IN, OU, AL | read only |
| High temperature protection state | high_temperature_protection_state | — | settable |
| Low temperature protection state | low_temperature_protection_state | — | settable |
| High temperature protection setting | high_temperature_protection_setting | °C · 20…70 | settable |
| Low temperature protection setting | low_temperature_protection_setting | °C · 1…10 | settable |
| Temperature sensor | temperature_sensor | °C | read only |
| Deadzone temperature | deadzone_temperature | °C · 1…9 | settable |
| Max temperature | max_temperature | °C · 20…70 | settable |
| Error status | error_status | — | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"state": false,
"current_heating_setpoint": 21,
"local_temperature": 20.5,
"child_lock": false,
"sensor_mode": "IN",
"high_temperature_protection_state": false,
"low_temperature_protection_state": false,
"high_temperature_protection_setting": 45,
"low_temperature_protection_setting": 6,
"temperature_sensor": 0,
"deadzone_temperature": 5,
"max_temperature": 45,
"error_status": 0,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"current_heating_setpoint":21.5}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"child_lock":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"high_temperature_protection_state":true}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"low_temperature_protection_state":true}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Cooler at night"
mode: single
triggers:
- trigger: time
at: "23:00:00"
actions:
- action: climate.set_temperature
target:
entity_id: climate.my_device
data:
temperature: 18
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.