DETA Grid Connect Smart Switch 2 Way 2 Gang (6952HA): ESPHome

Starter ESPHome config

Built from the pinout above. Keys and the Wi-Fi password come from secrets.yaml in ESPHome. Check the pins against your hardware revision before flashing: one model can ship with different boards.

substitutions:
  name: deta-grid-connect-smart-

esphome:
  name: ${name}
  friendly_name: "DETA Grid Connect Smart Switch 2 Way 2 Gang (6952HA)"

bk72xx:
  board: generic-bk7231n-qfn32-tuya  # BK7231T or BK7231N: check the chip marking

logger:
api:
  encryption:
    key: !secret api_key
ota:
  - platform: esphome
    password: !secret ota_password
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  ap: {}
captive_portal:

switch:
  - platform: gpio
    pin: P14
    id: relay1
    name: "Relay 1"  # Relay 1 and Button 1 LED
    restore_mode: RESTORE_DEFAULT_OFF
  - platform: gpio
    pin: P6
    id: relay2
    name: "Relay 2"  # Relay 2 and Button 2 LED
    restore_mode: RESTORE_DEFAULT_OFF

binary_sensor:
  - platform: gpio
    pin:
      number: P26
      mode: INPUT_PULLUP
      inverted: true
    name: "Button 1"  # Button 1 _(inverted)_
    on_press:
      - switch.toggle: relay1
  - platform: gpio
    pin:
      number: P23
      mode: INPUT_PULLUP
      inverted: true
    name: "Button 2"  # Button 2 _(inverted)_
    on_press:
      - switch.toggle: relay2

status_led:
  pin:
    number: P24
    inverted: true  # Status LED _(inverted)_

# Other pins from the pinout:
#   P7: Light 1 activation status, taking into account the _local_ activation (this devi
#   P8: Light 2 activation status, taking into account the _local_ activation (this devi

How to flash

• Most devices are flashed over UART: a 3.3 V USB-TTL adapter to RX, TX, GND and 3V3, holding GPIO0 to ground at power-on (ESP8266/ESP32). Mains power disconnected.
• Beken (BK72xx) and Realtek chips are flashed with ltchiptool, or with cloudcutter without opening the case if the firmware allows it.
• Details and board photos: the device page in the ESPHome database.

A config from scratch: ESPHome generator. Which pins are safe: pinout.

Similar devices

• Aubess WiFi Smart Switch with Power Monitoring
• CloudFree SWM1 Motion Light Switch
• Deta Grid Connect Smart Fan Speed Controller with Touch Light Switch
• DETA Grid Connect Smart Switch (Single 6911HA / Double 6912HA / Triple 6903HA / Quad 6904HA)
• DETA Grid Connect Smart Switch Single Gang Two-Way (6951HA)
• DETA Mechanism Switch (6014HA)
• Etekcity Voltson ESW01-EU
• Generic Glass Touch Switch with 1, 2, 3 pole variants