prefixkit Ask an engineerAsk Support RU

ESPHome devices

LSC Light White Ambiance 3000272: ESPHome

LSC Light White Ambiance 3000272 (lights and led strips, ESP8266): GPIO pinout and a starter ESPHome config with relays, buttons, LED. Local Home Assistant control with no cloud.

Type
Lights and LED strips
Chip
ESP8266
Region standard
EU

Pinout

PinFunction
P24Cold White (PWM)
P26Warm White (PWM)

Find it in shops: AliExpress

Links open a search in the shop; some are affiliate links: buying through them costs you nothing extra and supports this site. We do not sell devices or get them from manufacturers.

Starter ESPHome config

Built from the pinout above. Keys and the Wi-Fi password come from secrets.yaml in ESPHome. Check the pins against your hardware revision before flashing: one model can ship with different boards.

substitutions:
  name: lsc-light-white-ambiance

esphome:
  name: ${name}
  friendly_name: "LSC Light White Ambiance 3000272"

esp8266:
  board: esp01_1m  # most plugs and relays have 1 MB flash; check yours

logger:
api:
  encryption:
    key: !secret api_key
ota:
  - platform: esphome
    password: !secret ota_password
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  ap: {}
captive_portal:

# Other pins from the pinout:
#   P24: Cold White (PWM)
#   P26: Warm White (PWM)

How to flash

  • Most devices are flashed over UART: a 3.3 V USB-TTL adapter to RX, TX, GND and 3V3, holding GPIO0 to ground at power-on (ESP8266/ESP32). Mains power disconnected.
  • Beken (BK72xx) and Realtek chips are flashed with ltchiptool, or with cloudcutter without opening the case if the firmware allows it.
  • Details and board photos: the device page in the ESPHome database.

A config from scratch: ESPHome generator. Which pins are safe: pinout.

Similar devices

More tools: smart home

Home Assistant tools newEverything for the smart home section in one place.Remote access to Home Assistant newCloudflare Tunnel, nginx, Caddy, WireGuard configs.ESPHome generator newBoard and sensors to a ready YAML with keys.Zigbee coordinator picker newWhich stick for ZHA, Zigbee2MQTT and Thread.Zigbee device catalog new5,400 devices: features, MQTT, automations.ESP32 pinout newWhich GPIOs are safe: ESP32, C3, S3, ESP8266.MQTT discovery generator newConfig topic and JSON for Home Assistant.Zigbee channel vs Wi-Fi newPick a Zigbee channel clear of your Wi-Fi.Camera RTSP URL newHikvision, Dahua, Reolink, Tapo stream URLs.Frigate config generator newCameras, go2rtc, Coral or OpenVINO.Zigbee2MQTT config newAdapter, port, MQTT, channel.Home Assistant Docker Compose newHA, Mosquitto, Zigbee2MQTT, ESPHome stack.Mosquitto config newPasswords, ACL, WebSocket, TLS.undefinedHA template tester newJinja templates with states(), now(), filters.Which server for HA newGreen, Raspberry Pi 5 or an N100 mini PC.Automation syntax converter newservice → action, triggers:, conditions:.ESPHome Bluetooth proxy newBLE everywhere in the house via ESP32.ESPHome devices newPlugs and relays: pinouts and starter configs.Dashboard card generator newTile, Mushroom, gauge, history YAML.Electricity cost calculator newWhat a device costs per month and year.undefinedHome Assistant API newcurl, Python, JS requests and webhooks.Home Assistant and Alice newYandex Smart Home setup and config.MQTT client newTest a broker over WebSocket in the browser.Home Assistant YAML checker newAutomations and configuration.yaml mistakes.Tasmota commands newMQTT and Home Assistant in one Backlog.Shelly API newLocal HTTP RPC and MQTT commands.
Idea?