What it exposes
| Feature | Property | Values | Control |
|---|---|---|---|
| Power | power | W | read only |
| Energy | energy | kWh | read only |
| Voltage | voltage | V | read only |
| On / off (left) | state_left | — | settable |
| On / off (center) | state_center | — | settable |
| On / off (right) | state_right | — | settable |
| Operation mode (left) | operation_mode_left | control_relay, decoupled | settable |
| Operation mode (center) | operation_mode_center | control_relay, decoupled | settable |
| Operation mode (right) | operation_mode_right | control_relay, decoupled | settable |
| Remember state after power loss | power_outage_memory | — | settable |
| LED disabled night | led_disabled_night | — | settable |
| Device temperature | device_temperature | °C | read only |
| Flip indicator light | flip_indicator_light | — | settable |
| Action (button press) | action | single_left, double_left, single_center, double_center, single_right, double_right, single_left_center, double_left_center … | read only |
MQTT: state and commands
Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:
{
"power": 12.4,
"energy": 3.21,
"voltage": 230,
"state_left": "ON",
"state_center": "ON",
"state_right": "ON",
"operation_mode_left": "control_relay",
"operation_mode_center": "control_relay",
"operation_mode_right": "control_relay",
"power_outage_memory": false,
"led_disabled_night": false,
"device_temperature": 31,
"flip_indicator_light": false,
"linkquality": 120
}
Send commands to zigbee2mqtt/my_device/set:
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_left":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_center":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state_right":"TOGGLE"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"operation_mode_left":"decoupled"}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"operation_mode_center":"decoupled"}'
Watch the topics live from the browser: MQTT client.
Home Assistant automation example
Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:
- alias: "Turn off when idle"
mode: single
triggers:
- trigger: numeric_state
entity_id: sensor.my_device_power
below: 2
for: "00:15:00"
actions:
- action: switch.turn_off
target:
entity_id: switch.my_device_left
Check the YAML: YAML checker.
How to pair it
- In Zigbee2MQTT click Permit join.
- Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
- Keep the device close to the coordinator or a router while pairing.
- Give it a clear name: MQTT topics and Home Assistant entities are built from it.
Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.