prefixkit Ask an engineerAsk Support RU

Zigbee devices Lights and bulbs

ROBB ROB_200-065-0

LED Power Supply & RGBW Controller 24V 100W. Works with Zigbee2MQTT with no vendor hub or cloud: it pairs with a Zigbee stick and shows up in Home Assistant.

Vendor
ROBB
Model
ROB_200-065-0
Type
Lights and bulbs
Power
mains: usually a router that extends the mesh
Firmware updates (OTA)
no
Also sold as
Sunricher srp-zv9105-24-100cvf

Find it in shops: AliExpress

Links open a search in the shop; some are affiliate links: buying through them costs you nothing extra and supports this site. We do not sell devices or get them from manufacturers.

What it exposes

FeaturePropertyValuesControl
Lightstate, brightness, color_temp, color_temp_startup, color_xy, color_hson / off, brightness, colour temperature, startup colour temperature, colour, colour (hue/sat)settable
Light effecteffectblink, breathe, okay, channel_change, finish_effect, stop_effect, colorloop, stop_colorloopsettable
After power losspower_on_behavioroff, on, toggle, previoussettable

MQTT: state and commands

Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:

{
  "state": "ON",
  "brightness": 180,
  "color_temp": 370,
  "power_on_behavior": "off",
  "linkquality": 120
}

Send commands to zigbee2mqtt/my_device/set:

mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state":"ON","brightness":180,"color_temp":370}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"color":{"hex":"#ff8800"}}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state":"OFF","transition":2}'
mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"power_on_behavior":"on"}'

Watch the topics live from the browser: MQTT client.

Home Assistant automation example

Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:

- alias: "Light at sunset"
  mode: single
  triggers:
    - trigger: sun
      event: sunset
      offset: "-00:15:00"
  actions:
    - action: light.turn_on
      target:
        entity_id: light.my_device
      data:
        brightness_pct: 70
        color_temp_kelvin: 2700

Check the YAML: YAML checker.

How to pair it

  1. In Zigbee2MQTT click Permit join.
  2. Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
  3. Keep the device close to the coordinator or a router while pairing.
  4. Give it a clear name: MQTT topics and Home Assistant entities are built from it.

Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.

Similar devices

Idea?