Schneider Electric W564100 with Zigbee2MQTT and Home Assistant

What it exposes

Feature	Property	Values	Control
On / off	state	—	settable
Illuminance	illuminance	lx	read only
Temperature	temperature	°C	read only
Motion	occupancy	—	read only
Action (button press)	action	on, off, toggle, brightness_move_to_level, brightness_move_up, brightness_move_down, brightness_step_up, brightness_step_down …	read only

MQTT: state and commands

Zigbee2MQTT publishes the device state to zigbee2mqtt/my_device (my_device is the name you give the device). An example message:

{
  "state": "ON",
  "illuminance": 120,
  "temperature": 21.6,
  "occupancy": false,
  "linkquality": 120
}

Send commands to zigbee2mqtt/my_device/set:

mosquitto_pub -t zigbee2mqtt/my_device/set -m '{"state":"TOGGLE"}'

Watch the topics live from the browser: MQTT client.

Home Assistant automation example

Zigbee2MQTT creates Home Assistant entities from the device name. If it is called my_device, an automation in automations.yaml can look like this:

- alias: "Off at night"
  mode: single
  triggers:
    - trigger: time
      at: "23:30:00"
  actions:
    - action: switch.turn_off
      target:
        entity_id: switch.my_device

Check the YAML: YAML checker.

How to pair it

In Zigbee2MQTT click Permit join.
Put the device in pairing mode: usually a long press of the reset button (5–10 s) until the LED blinks; bulbs: switch the power off and on 5–6 times.
Keep the device close to the coordinator or a router while pairing.
Give it a clear name: MQTT topics and Home Assistant entities are built from it.

Exact procedure and model notes: the device page in the Zigbee2MQTT docs. No coordinator yet: coordinator picker.

Schneider Electric W564100

What it exposes

MQTT: state and commands

Home Assistant automation example

How to pair it

Similar devices

More tools: smart home